Download
Tools Required 8MM Socket 12MM Socket 10MM Socket 13MM Socket 17MM Socket 9/16″ Socket Phillips Screwdriver 13/32″ Drill Bit Vise Grips Reciprocating Saw Utility Knife LOCTITE Red.
Removable Tabs: Motorhome mount tow bars are recommended for use with this baseplate. Due to the design of the removable tabs, the RangeFinderII, Adventurer, and Ambassador tow bars can not be used. The Acclaim tow bar may be used, but will not fold and store on the front of the vehicle. Adapters, except the BX8833 and BX88151, can not be used with this baseplate.
Instructions: The plastic cover, front fascia, headlight assembly, and the metal bumper are removed and reinstalled for the baseplate installation. Trimming and drilling are required. The metal bumper will not be reinstalled. The dimensional variations between otherwise identical vehicles can be considerable. While the baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to compensate for auto manufacturer’s tolerances. These minor adjustments may include fi ling a hole slightly, bending electrical rods, and/ or bending end plates. The BX8869 Bulb and Socket Wiring Kit is available for this vehicle.
Installation Instructions. 1. Remove the four push pins from the black plastic cover on the top side of the fascia. Do this to both sides of the vehicle. Lift cover up to remove. Set cover and pushpins aside to be reinstalled later. 2. Remove one pushpin from the top edge of the fascia just inside of the headlight assembly. Do this to both sides of the vehicle. 3. Using the Phillips screwdriver, remove the Phillips screw from the corner of the fascia just forward of the front tire, inside the wheel well cover. Do this to both sides of the vehicle. 4. Remove one push pin from just forward of the front tire. Do this to both sides of the vehicle.
The post 2008-2010 Honda Odyssey BX2247 Installation Instructions appeared first on ToManual.com.